단단한 가스 저장소를 활용하려면 생산 요구 사항에 따라 우물을 파손 할 수있는 능력이 필요합니다. 대부분은 수평 웰 내의 특정 위치에서 다중 횡단 균열이 필요합니다. 생산성을 극대화하기 위해 다중 골절의 생성이 매우 중요합니다.
골절을 만드는 가장 일반적인 방법 중 하나는 frac 포트와 슬라이딩 슬리브를 사용하는 것입니다. 열린 홀 패커는 수평 웰의 다른 섹션을 격리합니다. 슬라이딩 슬리브가 각 패커 쌍 사이에 배치되고 시추공 내부에 볼을 주입하여 열립니다. 일반적으로 완료 문자열은 웰 내부에 배치됩니다. 이 문자열에는 frac 포트와 열린 구멍 패커가 포함됩니다. 포장업자 사이의 간격은 최대 수백 피트가 될 수 있습니다. 패커는 기계적, 유압식 또는 화학적 메커니즘에 의해 작동됩니다. 각 슬리브를 작동시키기 위해 적절한 크기의 볼이 우물 내부의 파손 유체와 함께 펌핑됩니다. 각 볼은 이전의 모든 슬리브의 개구보다 작지만 열려고하는 슬리브보다 큽니다. 볼의 착석은 슬라이딩 슬리브 조립체의 끝 부분에 압력을 가하여 슬라이딩 슬리브 조립체가 미끄러 져서 플랙 포트를 열게합니다. 일단 포트가 열리면, 유체는 완성 조립체 외부의 열린 홀 공간으로 우회되어 파손 될 수 있습니다.
각 파절 단계가 끝나면 다음 큰 공이 웰에 주입되어 다음 슬리브가 열리고 모든 슬리브가 열리고 웰에 여러 개의 골절이 생길 때까지 계속됩니다. 이 완성 기술의 가장 큰 장점은 비용을 절감하는 작동 속도입니다.
일반적으로 볼 크기는 .500 "또는 .250"증분으로 지정됩니다. 이 과정은 실패의 위험이 없으며 상당한 연구와 고려 후에 수행되어야한다는 것을 이해하는 것이 중요합니다. Frac 플러그는 플러그 위에서 만 밀봉하도록 설계되었습니다. 각 플러그는 맨드릴 위에 씰링하는 플라스틱 파쇄 볼을 사용합니다. 파쇄 볼은 플러그 아래에서 압력이나 흐름으로 맨드릴에서 자유롭게 부상 할 수 있습니다. 이렇게하면 치료 후 모든 구역을 즉시 역류시킬 수 있습니다.
Frac 공의 특징과 이점 - 골절 골절
파쇄 공(일명 "Frac 공")은 G-10/FR4 Frac 공, Torlon Frac 공, PEEK Frac 공 및 PEEK-PBI Frac 공으로 제공됩니다.
Professional Plastics에서는 Machined Frac Balls 또는 G-10, Torlon & PEEK Rods를 공급하여 직접 제작할 수 있습니다.
Torlon 5030은 이러한 응용 분야에서 최고의 선택으로 인식되기 시작했습니다. 가장 높은 하중, 작은 시트, 견고하고 내열성.
These Terms of Use govern your conduct associated with the Customer Ratings and Review service offered by Professional Plastics (the "CRR Service"). To the extent of any conflict
between Professional Plastics' Privacy Policy and these Terms of Use, these Terms of Use shall control with respect to the Customer Ratings & Reviews.
By submitting any content to Professional Plastics, you represent and warrant that:
you are the sole author and owner of the intellectual property rights thereto
all "moral rights" that you may have in such content have been voluntarily waived by you
all content that you post is accurate
you are at least 18 years old
use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
You further agree and warrant that you shall not submit any content:
that is known by you to be false, inaccurate or misleading;
that infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
that violates any law, statute, ordinance or regulation (including, but not limited to, those governing export control, consumer protection, unfair competition, anti-discrimination or false advertising)
that is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully
harassing to any individual, partnership or corporation
for which you were compensated or granted any consideration by any third party
that includes any information that references other websites, addresses, email addresses, contact information or phone numbers
that contains any computer viruses, worms or other potentially damaging computer programs or files.
You agree to indemnify and hold Professional Plastics (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.
For any content that you submit, you grant Professional Plastics a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you.
All content that you submit may be used at Professional Plastics's sole discretion. Professional Plastics reserves the right to change, condense or delete any content on Professional Plastics' website that Professional Plastics deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use. Professional Plastics does not guarantee that you will have any recourse through Professional Plastics to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Professional Plastics reserves the right to remove or to refuse to post any submission for any reason. You acknowledge that you, not Professional Plastics, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Professional Plastics, its agents, subsidiaries, affiliates, partners or third party service providers and their respective directors, officers and employees.
Professional Plastics may require you to provide certain information or data in order to submit a review. By submitting a review, you agree and consent to Professional Plastics' promotional use and display (whether online or offline) of all such information or data you provide with, or as part of, your review (including, but not limited to, any name, user name, screen name or other identifier, and any age, location, or other personal information you choose to provide).