Nylatron® 703XL은 특수 영역 적용을 위한 새로운 내부 윤활 주조 나일론입니다. 제로 "스틱 슬립"은 차별화된 기능입니다. Nylatron 703XL이 장착된 장치는 오늘날의 정교한 제어 장치로 가능한 작은 움직임을 정확하게 표시할 수 있습니다. 나일론 제품의 유용한 범위에 걸쳐 거의 모든 지점에서 서로 근사하는 정적 및 동적 마찰 계수가 이를 가능하게 합니다.
NYLATRON NSM의 내마모성과 제로 스틱 슬립'의 추가 이점으로 인해 NYLATRON 703 XL은 정밀한 동작 제어가 필요한 응용 분야에 이상적인 소재입니다.
NYLATRON 703 XL은 텔레스코픽 크레인 붐으로 일본 시장에서 시제품이 되었습니다. NYLATRON 703 XL은 붐이 움직이는 동안 진동이 거의 없어 크레인의 위치를 보다 효율적으로 지정하고 작업 표준을 더 안전하게 하기 때문에 선택한 소재입니다.
Nylatron® 703XL의 기능 및 이점
주요 혜택
스틱슬립 없음 NYLATRON 703 XL은 모든 상황에서 스틱슬립이 ZERO인 유일한 나일론입니다(도색되지 않은 표면에 대해 완전히 테스트했지만, 도색된 표면에 대한 테스트 및 현장 경험은 동일한 결과를 나타냅니다. 다른 응용 프로그램에서 실제 테스트로 확인됨). ZERO 스틱슬립 특성은 보다 정확하고 민감한 모션 제어를 가능하게 하며, 추가적으로 시스템의 전체 에너지 효율을 높일 수 있습니다.
최저 마찰 계수 독립적인 연구 기관에서 수행한 비교 테스트에 따르면 NYLATRON 703 XL은 상업용 나일론의 동적 및 정적 마찰 계수가 가장 낮습니다. NYLATRON 703 XL은 오늘날의 정교한 제어 장치 또는 시스템 설계의 효율성 향상을 통해 보다 정확한 작은 움직임을 보장합니다.
최고의 마모 성능 낮은 동적 마찰 계수는 우수한 내마모성을 제공하여 많은 경우 윤활을 줄이거나 제거합니다. NYLATRON 703 XL은 구성 요소 및 결합 부품의 수명을 연장합니다.
높은 하중을 견딜 수 있는 우수한 기계적 강도 NYLATRON 703 XL은 다른 내부 윤활 나일론과 유사한 기계적 특성과 다른 주조 나일론과 같은 높은 내열성을 가지고 있습니다.
신청: 착용 패드; 베어링 블록; 착용 가이드; 선형 베어링 및 부시; 특히 시작/정지 기능에서 모든 하중 지지 슬라이드 응용 프로그램.
These Terms of Use govern your conduct associated with the Customer Ratings and Review service offered by Professional Plastics (the "CRR Service"). To the extent of any conflict
between Professional Plastics' Privacy Policy and these Terms of Use, these Terms of Use shall control with respect to the Customer Ratings & Reviews.
By submitting any content to Professional Plastics, you represent and warrant that:
you are the sole author and owner of the intellectual property rights thereto
all "moral rights" that you may have in such content have been voluntarily waived by you
all content that you post is accurate
you are at least 18 years old
use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
You further agree and warrant that you shall not submit any content:
that is known by you to be false, inaccurate or misleading;
that infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
that violates any law, statute, ordinance or regulation (including, but not limited to, those governing export control, consumer protection, unfair competition, anti-discrimination or false advertising)
that is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully
harassing to any individual, partnership or corporation
for which you were compensated or granted any consideration by any third party
that includes any information that references other websites, addresses, email addresses, contact information or phone numbers
that contains any computer viruses, worms or other potentially damaging computer programs or files.
You agree to indemnify and hold Professional Plastics (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.
For any content that you submit, you grant Professional Plastics a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you.
All content that you submit may be used at Professional Plastics's sole discretion. Professional Plastics reserves the right to change, condense or delete any content on Professional Plastics' website that Professional Plastics deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use. Professional Plastics does not guarantee that you will have any recourse through Professional Plastics to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Professional Plastics reserves the right to remove or to refuse to post any submission for any reason. You acknowledge that you, not Professional Plastics, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Professional Plastics, its agents, subsidiaries, affiliates, partners or third party service providers and their respective directors, officers and employees.
Professional Plastics may require you to provide certain information or data in order to submit a review. By submitting a review, you agree and consent to Professional Plastics' promotional use and display (whether online or offline) of all such information or data you provide with, or as part of, your review (including, but not limited to, any name, user name, screen name or other identifier, and any age, location, or other personal information you choose to provide).