접착식 뒷면이있는 PEEK 테이프-PEEK 접착 테이프는 내열성, 내 화학성 및 우수한 전기 절연성과 결합 된 마찰 및 마모 특성의 최상의 조합을 제공하는 초강력 소재입니다. 개스킷, 항공 우주 부품, 고성능 라벨, 솔더 마스킹, 유전 장비, 반도체 처리 장비 등을 포함한 광범위한 응용 분야에서 사용하기에 이상적입니다. PEEK 테이프는 엔지니어와 설계자에게 PTFE (폴리 테트라 플루오로 에틸렌) 및 PI (폴리이 미드) 테이프에 대한 탁월한 대안을 제공합니다. PTFE 테이프와 비교할 때 VICTREX PEEK 테이프는 훨씬 더 높은 인장 강도를 나타내며 공격적인 조건에서 더 나은 마모 성능을 제공하는 더 강하고 더 강한 소재이며 밀도가 낮습니다. PI 테이프와 비교할 때 빅트 렉스 PEEK 테이프는 수분 흡수율이 낮고 강 알칼리성 환경에서 성능이 우수하며 인열 강도가 높습니다. PEEK 테이프는 최대 220 ° C (428 ° F)의 연속 작동 온도와 단기간 동안 더 높은 온도를 견딜 수 있습니다. 광범위한 압력, 속도, 온도 및 대향 거칠기에서 마모에 강합니다. 가수 분해에 안정된 PEEK 테이프는 넓은 주파수 및 온도 범위에서 전기적 특성을 유지하며 취화없이 109rads 이상의 방사선 노출을 견딜 수 있습니다. 또한 고온에서도 용제, 산, 염기, 연료 및 탄화수소에 대한 내 화학성이 우수합니다. PEEK 테이프는 다양한 항공 우주, 자동차, 식품 / 물, 의료 / 제약, 군사 / 핵 승인 및 표준을 충족 할 수 있습니다.
FEET (FT)로 달리 지정되지 않는 한 모든 크기는 INCHES로 표시됩니다.
엿봄 접착 테이프의 특징 그리고 이득
PEEK 테이프의 장점:
극도로 높은 내열성 및 연속 사용 온도 • 우수한 굴곡 및 인장 특성 • 우수한 내마모성 및 비침식성 • 우수한 내화학성 • 우수한 전기적 특성 • 우수한 전기적 특성 • 극도로 낮은 투과성 • 접착제는 습기 및 유해 화학물질에 저항함 • 매우 낮은 투과성• 우수한 선형 베어링 Matl • PSA는 적용 및 위치 지정이 용이함 • 컷 롤, 스트립, 모양, 다이 컷 조각, 시트에서 사용 가능 PEEK 테이프의 응용 분야:
• 자동차 가스켓 • 항공기 내부 • 헬리콥터 로터 블레이드(선단) • 변압기 슬롯 라이너 • 복사기 구성 요소 • 핫멜트 접착제 • 리드 연료 밸브 • 디스크 연마 캐리어 • 선형 슬라이딩 베어링 재료 • 폴리이미드(Kapton) 테이프의 가능한 대안 • 마모 저항성 와이어 랩 • 유전 장비(Down-Hole)
These Terms of Use govern your conduct associated with the Customer Ratings and Review service offered by Professional Plastics (the "CRR Service"). To the extent of any conflict
between Professional Plastics' Privacy Policy and these Terms of Use, these Terms of Use shall control with respect to the Customer Ratings & Reviews.
By submitting any content to Professional Plastics, you represent and warrant that:
you are the sole author and owner of the intellectual property rights thereto
all "moral rights" that you may have in such content have been voluntarily waived by you
all content that you post is accurate
you are at least 18 years old
use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
You further agree and warrant that you shall not submit any content:
that is known by you to be false, inaccurate or misleading;
that infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
that violates any law, statute, ordinance or regulation (including, but not limited to, those governing export control, consumer protection, unfair competition, anti-discrimination or false advertising)
that is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully
harassing to any individual, partnership or corporation
for which you were compensated or granted any consideration by any third party
that includes any information that references other websites, addresses, email addresses, contact information or phone numbers
that contains any computer viruses, worms or other potentially damaging computer programs or files.
You agree to indemnify and hold Professional Plastics (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.
For any content that you submit, you grant Professional Plastics a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you.
All content that you submit may be used at Professional Plastics's sole discretion. Professional Plastics reserves the right to change, condense or delete any content on Professional Plastics' website that Professional Plastics deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use. Professional Plastics does not guarantee that you will have any recourse through Professional Plastics to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Professional Plastics reserves the right to remove or to refuse to post any submission for any reason. You acknowledge that you, not Professional Plastics, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Professional Plastics, its agents, subsidiaries, affiliates, partners or third party service providers and their respective directors, officers and employees.
Professional Plastics may require you to provide certain information or data in order to submit a review. By submitting a review, you agree and consent to Professional Plastics' promotional use and display (whether online or offline) of all such information or data you provide with, or as part of, your review (including, but not limited to, any name, user name, screen name or other identifier, and any age, location, or other personal information you choose to provide).